
The concept, which made its world premier at the 2005 Tokyo Motor Show as the Fine-X, is powered by four in-wheel electric motors. Like Mitsubishi's all-electric in-wheel motor concept, the MIEV Concept-EZ, the Fine-T takes advantage of the in-wheel motors' space saving charactaristics to offer a compact mono-box design that is as small as a Toyota Yaris on the outside but as roomy as a mid-size wagon on the inside. The electric motors, hydrogen stack, tanks, batteries and other electric drive components are mounted beneath the vehicle floor or in or near the wheels, allowing availabe cabin space to extend nearly the entire length of the vehicle making for a comfortable roomy interior while keeping the exterior size compact and helping create a low center of gravity.

The ultra-low emissions Fine-T hydrogen-electric hybrid concept, developed by Environment and Safety Toyota, is intended to demonstrate how close a vehicle can come to having zero effect on the environment. With the Fine-T, Toyota pursued using carbon-neutral materials over a wide range of interior fittings, processing polylactic acid (PLA), obtained from sugar cane, as well as Kenaf and other plant fiber into a variety of textures for door trim, suede-like ceiling material, seat nets and floor mats, GCC reports.

The Fine-T is designed to offer major advancements in handling performance when driving on narrow roads and when parking in tight areas, helping to maximize the driving experience. The concept uses an independent four-wheel large-angle steering system and independent four-wheel drive incorporating in-wheel motors with integrated drive power and wheel turning-angle control [translation: both the front and back wheels can be turned through wide arcs of up to 180 degrees]

The Fine-T's independent four-wheel drive system, independent four-wheel steering and under-floor mounting of the fuel-cell system contribute to the concept's low center of gravity, which is lower than most vehicles. This and the vehicle's low movement of inertia add to the Fine-T's driving stability.

Well, this is the first I've seen in the way of in-wheel motor concepts from anyone other than Mitsubishi [whose work we've written about a few times here before: here, here and here. I am very intruiged by the freedom to innovate that an in-wheel architecture gives you and I'm happy to see some new vehicle designs that start to move away from the tradition vehicle forms that have been imposed by the use of an internal combustion engine.
An in-wheel electric motors architecture can be paired with any all-electric drive system and now, with the Fine-T (hydrogen-electric hybrid) added to the ranks of Mistubishi's MIEV Concept-EZ (all-electric) and Concept-CT (electric-dominant series-parallel hybrid), we've seen a number of potential configurations. So, when is the plug-in hybrid coming? A hydrogen plug-in perhaps...
FCHVs (Fuel Cell Hybrid Vehicles), a.k.a., plug-in, hydrogen hybrids, already exist.
ReplyDeleteTwo examples:
1. Before Think! folded they had shown a Think! City FCHV http://jcwinnie.biz/wordpress/?p=1065
2. Toyota had provided eight units of its FCHV-BUS to transport visitors between various venues at EXPO 2005 in Aichi, Japan. http://jcwinnie.biz/wordpress/?p=848
Thanks for the tip. I was not aware that a plug-in hydrogen hybrid had been developed although there's obviously nothing preventing one as all the technology components have been developed.
ReplyDeleteIs Toyota's FCHV-BUS a plug-in? It looked from your post like it was a grid-independent hybrid fuel cell vehicle.