SeQuential Biofuels has opened a solar-powered retail biofuels station in Eugene, Oregon this week. The station offers a full range of ethanol and biodiesel blends: E10, E85, B5, B20 and B100.
“We have watched the offering of mainstream organic products and recycled products expand significantly over the last five years”, said Ian Hill, project developer and SeQuential Biofuels co-founder. “Today our customers are demanding domestically-produced, renewable motor fuel options as well.”
The station features a number of green design features including a 244-panel solar array that covers the fueling islands and a "living roof" consisting of 4,800 plants installed in five inches of soil on the roof of the attached convenience store. The 33kW solar array will provide 30% to 50% of the electrical power that the station will require annually.
The “living roof” will help to control rainwater runoff on the site and will help cool the convenience store during the summer. Other eco-friendly design elements include stormwater detention bioswales where plants will filter pollutants from rainwater that rinses the roadways and parking areas and will clean the water before it leaves the site. SeQuential also has made a significant effort to source building materials that are made in the Pacific Northwest region.
The new station also features many energy-efficient design features meant to reduce the station's energy consumption. “Building energy efficient buildings that work with the natural environment adds to SeQuential’s overall goal of sustainability and responsibility,” Hill said. “It just makes sense.”
A portion of the biodiesel dispensed at the station is received from SeQuential-Pacific Biodiesel in Salem, Oregon. SeQuential-Pacific Biodiesel is Oregon’s only ASTM-certified, commercial biodiesel production facility, producing one million gallons of biodiesel per year from used cooking oil collected throughout the Pacific Northwest and from canola oil grown in Eastern Oregon.
The land where the station is located was the site of a previous fuel station that shut down more than ten years ago. Under supervision of the former owner, the site had been contaminated by leaking gasoline tanks and pumps and the owner had abandoned it. SeQuential worked with Lane County and with the Oregon Department of Environmental Quality to clean up the previously polluted brownfield property and put it back into productive use.
“Businesses and individuals are increasingly aware of the impact that their choices have on our economy and on our natural environment,” Hill said. “SeQuential is dedicated to setting an example of responsible, sustainable development and to offering product options that create the most positive impact on people’s lives and communities.”
The fuel station also includes a convenience store that carries top-shelf natural foods and beverages, many of which are produced by regional companies. The store also houses an annex of Sweet Life Patisserie, an established local coffee and pastry shop renowned for its premium coffees, baked goods and savories, complete with wireless internet and an inviting seating area. Local farmers will stock a seasonal fresh produce stand also located at the station.
Founded in August 2002 by Ian Hill and Tomas Endicott, SeQuential Biofuels is a biofuels marketing, distribution and retail company with offices in Portland and Eugene, Oregon. Since its inception, the company has blazed the trail for the biofuels market in Oregon. In partnership with more than 20 regional fuel distributors, SeQuential offers commercial biodiesel/petroleum diesel blends to businesses, governments and individuals at more than 25 retail and cardlock pumps throughout the state.
In 2004, SeQuential formed SeQuential-Pacific Biodiesel, a joint venture with Pacific Biodiesel of Maui, Hawaii, to construct Oregon’s first and only commercial biodiesel production facility. The facility began operation in July 2005, and it produces one million gallons of ASTM-certified biodiesel made from used cooking oil collected from Pacific Northwest restaurants and food processors and from virgin canola oil grown in Eastern Oregon.
This is great! I've been waiting for this station to open for a while now. Now, whenever I'm in Eugene, I'll stop in to fill up with E10 before the trip home. I'd definitely encourage any of my readers in the Eugene area to check out the new SeQuential station. I hope SeQuential finds this station successful and opens up other stations in Oregon - Portland making the most sense for the next retail station.
[A hat tip to Green Car Congress]
Sunday, August 27, 2006
News From My Backyard: SeQuential Biofuels Opens Solar-powered Biofuels Station in Eugene, OR
Monday, August 21, 2006
The Engineer-Poet Tackles Coal-to-Liquids
Well, since I have been too busy these past few weeks to do any good analysis recently, I'll refer you all to an excellent example of what a little bit of simple math can do (ok, more than a little bit, but it's still nothing more complicated than multiplication and division): the Engineer-Poet, over at the Ergosphere recently took aim at Coal-to-Liquids projects, using some back-of-the-envelope math to illustrate how those pushing CTL and citing our vast coal reserves as a solution to our energy insecurity are leading us down the wrong path.
Head here for the full story, but as usual, E-P's analysis is pretty dead on:
"If we are looking for good investments in America's future, batteries look like our best bet. The sign for Fischer-Tropsch is pointing down the road to ruin."Now, if only the folks in charge would hire a young staffer for minimum wage to surf through the energy blogosphere for some good ideas. What is it going to take for the politicians, businessmen and policy wonks to realize that electrification of transportation - i.e., plug-in hybrids and electric vehicles - are the way to go. We all remember the incredible potential of plug-ins, don't we... Read more!
U.S. Wind Industry Passes 10,000 MW Milestone
[From Wind Energy Weekly:]
U.S. wind energy installations now exceed 10,000 MW in generating capacity, and produce enough electricity on a typical day to power the equivalent of over 2.5 million homes, AWEA announced August 14. A megawatt of wind power generates enough to serve 250 to 300 average homes.
“Wind energy is providing new electricity supplies that work for our country’s economy, environment, and energy security,” said AWEA Executive Director Randall Swisher. “With its current performance, wind energy is demonstrating that it could rapidly become an important part of the nation’s power portfolio.”
The record growth in wind power is driven by demand for the popular energy source and concerns over fuel price volatility and supply. It was also made possible by a timely renewal of the production tax credit (PTC), a federal incentive extended in the Energy Policy Act signed a year ago by President Bush. Previously, the credit had been allowed to expire three times in seven years, and this uncertainty discouraged investment in wind turbine manufacturing in the country. AWEA is calling for a long-term extension of the PTC before its scheduled expiration at the end of 2007 to avoid further “on-again-off-again” cycles and encourage long-term investment.
The industry is gaining momentum as it grows. The first commercial wind farms were constructed in California in the early 1980s, and after reaching 1,000 MW in 1985, it took more than a decade for wind to reach the 2,000-MW mark, in 1999. Since then, however, installed capacity has grown fivefold (for a chart showing historical cumulative capacity, go to http://www.awea.org/faq/instcap.html ). Today, the industry is installing more wind power in a single year (3,000 MW expected in 2006) than the amount operating in the entire country in 2000 (2,500 MW).
As the U.S. wind energy industry sails past the 10,000-MW mark, AWEA released the following figures and statistics to illustrate some of the economic, environmental, and energy security benefits of wind power development.
Economic benefits:
Environmental benefits:
Energy security benefits:
More figures and statistics on the 10,000-MW milestone are available on the AWEA Web site at www.awea.org/10GW.html.
Wednesday, August 16, 2006
Study Finds Growing Interest in Plug-in Hybrids
A new study by global market research company Synovate shows that 49% of consumers - once the concept of a plug-in hybrid was explained to them - said they would consider purchasing one, roughly the same level of consideration as standard hybrid technology, according to a Green Car Congress (GCC) post.
The study, conducted among 1,240 buyers and those intending to buy new light duty cars and trucks, found that while awareness of hybrids is now very high among US consumers, consideration of a conventional hybrid vehicle has flattened at just under 50%.
Tim Englehart, Manager of Alternative Fuels Studies at Synovate Motoresearch had this to say:
Plugging the vehicle in at home means fewer trips to the gas station and lower operating costs. The unknown with this technology is the additional purchase cost. However, there is a considerable group of consumers who are willing to pay to get these unique benefits. It would also be an excellent way to transfer some of the country’s dependence on oil to the national resources we use to power the electric power grid. We believe it’s something to watch.The study also found that while 37% of US consumers would consider purchasing a Flex Fuel vehicle that runs on E85, more than one-third of those same consumers lose interest when they learn that there is a reduction in fuel economy.
Consideration for diesels ran at roughly half the consideration of hybrids.
Our data give us strong reason to believe that if manufacturers can meet the emissions requirements of the new diesel legislation, some are going to surprise the market with the products they introduce and the buyers to whom those vehicles appeal, said Scott Miller, CEO of Synovate Motoresearch.
The information came from Synovate’s latest semi-annual survey of consumer attitudes toward advanced propulsion and alternative fuel vehicles.
There's another summary of the study here, which focuses on the still relatively low awareness of several alternative vehicle/fuel options (most notably, direct-injection diesel).
Well, this is good to see. I hope Toyota and others are paying attention to this.
As regular readers of Watthead know, I have great confidence in the ability of plug-in hybrids to contribute dramatically to a reduction in our petroleum dependence and our overall greenhouse gas emissions. Plug-ins offer:
And, we more or less have the technology for plug-ins available today (unlike some other oft-proposed alternatives).
If as many people are interested in buying plug-ins as are intersted in buying hybrids (and twice as many as are interested in buying diesels), it seems like there is a clear enough market out there to justify bringing at least a few plug-in hybrids to market. And several companies, most notably Toyota, but also Daimler-Chrysler, Honda and even Ford and GM, could probably bring plug-ins to market in just a couple of years. They could easily start by basing their first models on their already established hybrid models. The economies of scale and supply chains are already established for all of the electrical components shared between plug-ins and regular (grid-independent) hybrids, so the only hurdle is to establish supply chains for high-energy batteries suitable for plug-ins.
Consumers want them, governments and fleet operators want them, ... I want them ... why aren't any of the big auto manufacturers offering one yet? Get on with it already!
Read more!
Friday, August 11, 2006
Watthead Turns One Year Old...
... (the website and pseudonym, that is, not the author) ...
That's right, it's now been a whole year since I launched Watthead to discuss climate change, sustainability and the path to a clean energy future.
For those of you who are curious, it all began with this post on August 11th, 2005: Start Fighting Global Warming ... Like Yesterday People!"
The sentiment expressed in that original post still motivates this blog and it's author: we must act quickly and decisively to cut back global emissions of greenhouse gases to mitigate and stabilize the effects of global climate change, many of which are already underway (two links), and one of the most effective ways we can do that, I believe, is to transition our energy infrastructures - both electricity and transportation - to sustainable and clean sources of energy.
I'd like to thank all of you who read this blog, especially those who regularly comment. We're up to about 100 visits per day now, and I appreciate being able to share news and commentary about the exciting and constantly changing field of sustainable energy with all of you.
I'd like to open the comments in this post as an open thread to provide feedback, suggestions, and comments about this blog in general. What would you like to see more/less of? What subjects do you enjoy the most/least? What suggestions do you have to improve the content/layout/anything else of this blog?
Thanks again to all of you out there. I'd love to hear more comments from those of you who don't regularly leave them. Share your ideas, and let's use this blog as a place for discussion, comment and banter.
Cheers,
Jesse Jenkins (aka Watthead)
Thursday, August 10, 2006
More on MIT's LEES Ultracapacitors - Is this the End-Game for Batteries?
[RenewableEnergyAccess (REA) has more today on MIT's high-capacity nanoengineered LEES ultracapacitors, potentially the end-game for battery energy storage. Check it out:]
Just about everything that runs on batteries -- flashlights, cell phones, electric cars, missile-guidance systems -- would be improved with a better energy supply. But traditional batteries haven't progressed far beyond the basic design developed by Alessandro Volta in the 19th century. Until now, say researchers at the Massachusetts Institute of Technology.
Work at MIT's Laboratory for Electromagnetic and Electronic Systems (LEES) holds out the promise of the first technologically significant and economically viable alternative to conventional batteries in more than 200 years.
Battery advances, particularly big breakthroughs, are widely seen as complementary to renewable energy technologies, which could benefit from improvements in electricity storage. A major battery breakthrough could also have major implications in the realm of plug-in hybrid electric vehicles whose batteries could be charged partly by renewable energy such as solar or wind.
Joel E. Schindall, the Bernard Gordon Professor of Electrical Engineering and Computer Science (EECS) and associate director of the Laboratory for Electromagnetic and Electronic Systems; John G. Kassakian, EECS professor and director of LEES; and Ph.D. candidate Riccardo Signorelli are using nanotube structures to improve on an energy storage device called an ultracapacitor.
Capacitors store energy as an electrical field, making them more efficient than standard batteries, which get their energy from chemical reactions. Ultracapacitors are capacitor-based storage cells that provide quick, massive bursts of instant energy. They are sometimes used in fuel-cell vehicles to provide an extra burst for accelerating into traffic and climbing hills.
However, ultracapacitors need to be much larger than batteries to hold the same charge.
The LEES invention would increase the storage capacity of existing commercial ultracapacitors by storing electrical fields at the atomic level.
Although ultracapacitors have been around since the 1960s, they are relatively expensive and only recently began being manufactured in sufficient quantities to become cost-competitive. Today you can find ultracapacitors in a range of electronic devices, from computers to cars.
However, despite their inherent advantages -- a 10-year-plus lifetime, indifference to temperature change, high immunity to shock and vibration and high charging and discharging efficiency -- physical constraints on electrode surface area and spacing have limited ultracapacitors to an energy storage capacity around 25 times less than a similarly sized lithium-ion battery.
The LEES ultracapacitor has the capacity to overcome this energy limitation by using vertically aligned, single-wall carbon nanotubes -- one thirty-thousandth the diameter of a human hair and 100,000 times as long as they are wide. How does it work? Storage capacity in an ultracapacitor is proportional to the surface area of the electrodes. Today's ultracapacitors use electrodes made of activated carbon, which is extremely porous and therefore has a very large surface area. However, the pores in the carbon are irregular in size and shape, which reduces efficiency. The vertically aligned nanotubes in the LEES ultracapacitor have a regular shape, and a size that is only several atomic diameters in width. The result is a significantly more effective surface area, which equates to significantly increased storage capacity.
The new nanotube-enhanced ultracapacitors could be made in any of the sizes currently available and be produced using conventional technology.
"This configuration has the potential to maintain and even improve the high performance characteristics of ultracapacitors while providing energy storage densities comparable to batteries," Schindall said. "Nanotube-enhanced ultracapacitors would combine the long life and high power characteristics of a commercial ultracapacitor with the higher energy storage density normally available only from a chemical battery."
This work was presented at the 15th International Seminar on Double Layer Capacitors and Hybrid Energy Storage Devices in Deerfield Beach, Fla., in December 2005. The work has been funded in part by the MIT/Industry Consortium on Advanced Automotive Electrical/Electronic Components and Systems and in part by a grant from the Ford-MIT Alliance.
Resources:
As I hinted at in the into, I think that carbon-based, high-energy density, long lasting ultracapacitors like MIT's LEES ultracap may be the endgame for battery energy storage, at least for electric and plug-in hybrid vehicles.
Ultracaps have very high power densities, delivering great acceleration and performance, as well as taking full advantage of regenerative braking (NiMH and Li-ion batteries typically can't charge fast enough to accept all the energy potentially recoverable during regenerative braking). Additionally, ultracaps are very long-lasting (compared to batteries), can undergo several hundred cycles, last 10+ years, and have typically have no problems with cold-start conditions. Their general weakness is their lack of energy density, meaning they generally have to be coupled with a storage battery (or fuel cell) in any electric drive system.
If MIT or someone else can develop an ultracap with the energy storage of a traditional Li-ion battery, that would be a major coup for the electric vehicle industry. And if the resulting ultracap was largely made of carbon - a material available in practically limitless supply - any potential materials supply limitation concerns (i.e. for lithium or platinum or other battery or fuel cell components) would be essentially a thing of the past.
Let's hope MIT's researchers can deliver this ultracap (and soon) to a commerical partner for deployment in EVs or PHEVs.
[EDIT: Upon closer examination, it appears that this REA article is the same as the one that appeared back in February (and was picked up by Green Car Congress, the Energy Blog and numerous others). It appears that REA's RSS aggregator or whatever else they are using to find posts screwed up (this happens sometimes; yesterday, for example, REA picked up a post from August 9 2005, instead of 2006).
So, the article isn't any new development, I guess. However, since I didn't post on it here at Watthead back in February (and I've already gotten this post written), I go ahead and post it anyway.]
Wave Energy Project in Portugal Awarded Funds
Finavera Renewables Limited's wholly owned subsidiary, AquaEnergy Group Ltd., has been successful in its application to the European Commission under the Framework Protocol 6 (FP6) program, RenewableEnergyAccess (REA) reports.
As a result, the European Commission may contribute up to Euro 1.37 million [US$1.75 million] toward the deployment of a 2 megawatt (MW) full-scale wave-energy power plant off the coast of Portugal, subject to successful contract negotiations and completion of the internal, formal selection process.
According to REA, the proposed power plant will be situated in 60 meters of water approximately 10 kilometers off the coastline midway between the Portuguese cities of Lisbon and Porto. Once successful operation of the plant has been demonstrated, the plant generating capacity is expected to be increased to 100 MW - enough electricity to power more than 60,000 homes.
"This award reflects the last four years of work that the team has put into the project," said Alla Weinstein, CEO of AquaEnergy. "With our partners, Dunlop Oil and Marine, Portuguese engineering group Kynamar and Labelec, a division of the Portugal's largest utility - Energias de Portugal (EDP) - we will begin executing our deployment plan once negotiations with the European Commission and the partners are completed."
"The Portuguese groups in particular have been very supportive," said Weinstein, "as they see the long term value in building a wave technology industry. It has been estimated recently that the country's coastline contains enough exploitable energy to contribute up 20% of the country's total electricity consumption - a total value of over Euro 5 billion [US$6.3 billion]."
"We are looking towards the future where wave power generation will join the commercial realm along with other types of renewables like wind energy," said Jason Bak, CEO of Finavera Renewables. "Recent technological advances are moving wave energy forward to a cost competitive renewable source of electricity. Not only does this award assist us in deploying our AquaBuOY technology at a true commercial scale, but along with our 1 MW Makah Bay project in Washington, USA, we can now start to look at building a pipeline of other projects worldwide."
Well this should help kickstart AquaEnergy's wave energy projects, both in Portugal and elsewhere. As Finavera's CEO, Jason Bak, mentioned above, AquaEnergy is also developing a 1 MW project in Makah Bay off the Northwestern tip of Washington's Olympic Penninsula. The funding for their Portugese project will help them prove their technology, and if the project expands to 100 MW, will help AquaEnergy build a supply chain that will bring down their costs and further spur the development of other wave energy projects, including Makah Bay.
AquaEnergy's CEO, Alla Weinstein, spoke at the recent Ocean Renewable Energy Conference in Newport on AquaEnergy's efforts, including the Makah Bay and Portugal projects. A summary of that conference can be found here.
Portugal seems to be setting itself up as the European proving grounds for wave energy companies, with both Ocean Power Delivery, and now AquaEnergy, deploying their first commercial projects in Portugese waters. Scotland is also competing to become the center of the emerging European ocean energy industry, and if Oregon is smart (and the efforts of local ocean energy boosters pays off), it could become the center of the North American ocean (or at least wave) energy industry.
The ocean energy industry is going to be fun to watch over the next four or five years, as a number of companies get their first projects in the water, and try to expand to truly utility scale projects (i.e., in the 10s to 100s of megawatts). This truly is the birth of a new renewable energy industry, and I for one welcome this new addition to our toolbox of renewable energy resources.
Eat Your Chocolate - It Could Be a New Source of Renewable Energy
[OK, I got a chuckle out of this one; from Renewable Energy Access:]
Research from the University of Birmingham in the UK suggests that by indulging in chocolate, we could be contributing to a new source of renewable energy. Scientists at the University's School of Biosciences have found a way to extract hydrogen from confectionery waste -- a process that could have a major impact on the future handling of food waste and its potential as a supplier of renewable energy.
Using E. coli bacteria, identified by the researchers as having the right sugar-consuming, hydrogen-generating properties, a fermenter is set up containing the bacteria along with the caramel-like waste product and a gas such as nitrogen. Under these conditions, the E. coli ferments the sugars, generating a range of organic acids. To alleviate this toxicity in their environment they convert formic acid to hydrogen. Hydrogen is one of the cleanest fuels available and when used to power a fuel cell, the only byproduct is water.
The hydrogen generates clean electricity via a fuel cell. Thus, food factories could use their own product waste to generate energy for the manufacturing process; they might even be able to fuel their own vehicles from the hydrogen generated in this way. And it's a technology that could be adapted for use with most forms of food waste, making it internationally applicable.
There. Our energy problems are solved... just eat your chocolate!












